New installations & system engineering across North Florida
Compressed Air Systems Designed for How You Actually Operate
An undersized compressor chokes your output. An oversized one wastes energy for a decade. We design and install systems that match your demand, your facility, and your growth plan.
Or request a callback and we’ll reach out within 30 minutes during business hours.
50+ Years of install experience
Hundreds of facilities built out
Turnkey Setup from Start to finish
Design through commissioning
Aluminum Air Piping systems
Corrosion-free, modular, expandable
The cost of a bad install
Your compressor is a 10-year decision. The install should match.
70%+
of your compressor’s lifetime cost is energy. The right system design controls that number.
Buying a compressor is easy. Picking the right one, sizing it correctly for your actual demand, designing the piping to minimize pressure drop, integrating air treatment, and configuring controls to balance load across multiple units? That’s the part where most facilities get it wrong.
A poorly designed compressed air system wastes energy every hour it runs. Undersized piping creates pressure drops that starve your end-use tools. Oversized compressors cycle on and off wastefully because they were spec’d for a demand profile that doesn’t match reality. And none of that shows up until the electricity bills start piling up.
ACE Services designs and installs compressed air systems from the ground up. We don’t just drop a compressor on a pad and walk away. We survey your facility, model your demand, lay out piping for efficiency and future expansion, integrate dryers and filtration, configure controls, and commission the system before handing you the keys.
Whether it’s a single compressor for a new shop or a multi-unit system feeding a large manufacturing floor, we handle the full scope. Equipment selection, piping layout, air treatment, controls, and startup. One team, one point of accountability.
What we install
From Equipment to Piping to Controls
We handle the full scope. Not just the box on the floor.
Rotary Screw Systems
Oil-injected and oil-free rotary screw installations from 5HP to 500HP+. Single units or multi-compressor rooms.
Reciprocating Compressors
Piston-based systems for intermittent-duty shops and smaller commercial applications.
VSD Installations
Variable Speed Drive systems that match output to demand in real time, cutting energy waste in variable-load facilities.
Aluminum Piping
Lightweight, corrosion-resistant, modular piping systems that maintain air quality and allow for easy future expansion.
Air Treatment Integration
Refrigerated dryers, desiccant dryers, coalescing filters, and condensate management built into the system design from day one.
Controls & Sequencing
Master controllers and sequencers that balance load across multiple compressors for maximum efficiency and uptime.
Air Receivers & Storage
Heat exchanger cleaning, drain trap testing, and condensate management to keep temperatures and moisture in check.
Retrofits & Upgrades
Adding capacity, replacing aging equipment, improving piping, and upgrading controls in existing facilities without starting from scratch.
Industries We Support
Who Needs a New Compressed Air System
New Facilities & Build-Outs
Starting fresh? We design the compressed air system alongside your build so it's right from day one. Not an afterthought bolted on at the end.
Growing Operations
Outgrowing your current compressor? We'll assess whether you need a larger unit, an additional unit, or a redesigned distribution system to handle the increased demand.
Aging System Replacements
Running a 20-year-old compressor that's costing more in repairs and energy than it's worth? We'll design the replacement system and manage the transition without shutting you down.
Why ACE handles your install
We Design Systems. Not Just Equipment Drops.
01
Demand-based system design
We start with your air consumption profile, not a compressor catalog. The equipment fits the demand. Not the other way around.
02
Full project ownership
We handle everything from the initial survey through equipment procurement, physical installation, piping, controls, startup testing, and operator training. One team from start to finish.
03
Piping that doesn't rob pressure
We install aluminum piping systems designed to minimize pressure drop and eliminate the internal corrosion that steel pipe develops over time.
04
Maintenance-ready from day one
Every system we install is designed for easy service access. And if you want it, your new system rolls directly into our preventative maintenance program.
All Brands. No Bias.
Our technicians are trained across manufacturers. Whether your nameplate says Ingersoll Rand or Mattei, we bring the same depth of expertise.
Brands we service include:
- Ingersoll Rand
- Atlas Copco
- Sullair
- Quincy
- Kaeser
- Elgi
- Chicago Pneumatic
- FS Curtis
- Gardner Denver
- Hertz
- Sauer
- Saylor-Beall
- Mattei
our process
How an Installation Works
Structured from survey to startup. No surprises along the way.
1. Site Survey
Facility walkthrough and demand assessment
2. System Design
Equipment, piping, and treatment layout
3. Proposal & Timeline
Clear scope, pricing, and schedule
4. Procurement
Equipment ordering and coordination
5. Installation
Physical setup, piping, and controls
6. Startup & Training
Commissioning and operator walkthrough
Need temporary air during your installation?
We deploy rental compressors to bridge the gap during new installs and system transitions
What our clients say
Trusted by Facilities Across the Region
50+ years of relationships built on honest work and fast response
Common Questions
Questions About Air Compressor Installation and Design
If your question isn’t here, call us at 904-378-0280. We’d rather talk to you than make you read another FAQ page.
Both. We assess your facility, design the full system layout including piping, air treatment, and controls, and then install everything. Turnkey.
Yes. We regularly add capacity, replace aging equipment, install new piping, and upgrade controls in existing facilities.
We sell and install Hertz, Sauer, Saylor-Beall, and Mattei systems. We also integrate equipment from other manufacturers into new or existing designs.
A single compressor install may take 1 to 2 days. A full system with piping and air treatment for a large facility could take several weeks. We provide a detailed timeline upfront
Yes. We install aluminum piping systems that are lightweight, corrosion-resistant, and modular for future expansion.
Yes. All installation work is backed by our labor warranty. Manufacturer warranties apply to new equipment.
Get In Touch
Ready to Build or Upgrade Your Compressed Air System?
Let’s start with a site survey and build something that actually fits your operation.
- 904-378-0280 — Call us directly
- 5281 Edgewood Ct, Jacksonville, FL 32254 — Office & parts
- info@aceservice.us — Sales & general inquiries
Service Hours
Monday – Friday: 7:00 AM – 5:00 PM
Emergency service available 24/7
Request Service
Fill this out and we’ll get back to you within one business day. Emergency? Call instead.
We don’t share your information. We don’t send marketing emails. We fix compressors.
Our Service Area
Jacksonville • St. Augustine • Orange Park • Gainesville • Lake City • Palatka • Fernandina Beach • Palm Coast • Daytona Beach • Ocala • Brunswick GA • Savannah GA • Kingsland GA • Valdosta GA
Explore Our Other Services
Your Compressed Air Runs Better With ACE Behind It
Schedule a repair, request a quote, or talk to our team today.