Scheduled Air Compressor service programs across North Florida
Air Compressor Maintenance That Pays for Itself
The cheapest repair is the one you never need. Our maintenance programs are built around your equipment, your hours, and your tolerance for risk. Not a generic checklist from a manual.
Or request a callback and we’ll reach out within 30 minutes during business hours.
50+ Years of field data
We know what fails, when, and how to prevent it
Custom Programs per facility
Not cookie-cutter intervals
Documented & Every visit reported
Full visibility into equipment health
The hidden cost of skipping maintenance
Your compressor doesn't fail all at once. It fails slowly, then all at once.
20-35%
of a typical facility’s electrical costs come from the compressed air system alone
Oil breaks down. Filters clog. Belts stretch. Bearings wear. None of these happen overnight. They happen gradually, pulling your compressor further from peak efficiency every week. Your energy bill creeps up. Your output drops. And then one Tuesday morning the whole thing locks up and production stops cold.
That failure wasn’t random. It was the final result of months of deferred maintenance. The oil change that got pushed back. The filter that looked “fine” from the outside. The vibration nobody investigated because the machine was still technically running.
ACE Services designs preventative maintenance programs that break this cycle. We don’t hand you a schedule from a manufacturer’s brochure. We assess your specific equipment, your run hours, your operating environment, and build a service cadence that actually matches how you use your compressors. Every visit is documented, every finding reported, every recommendation backed by what we see in the field.
The math is simple. A quarterly maintenance visit costs a fraction of a single emergency repair. And it keeps your energy costs from drifting upward while your equipment slowly degrades.
What’s included
What Our Maintenance Covers
Every visit follows a structured inspection and service protocol. Nothing gets skipped. Nothing gets glossed over.
Oil & Lubricant Service
Analysis, drain, and replacement. We match the correct lubricant to your equipment and operating conditions.
Filter Replacement
Air intake, oil, and separator element replacement at proper intervals to maintain airflow and oil quality.
Belt & Coupling Inspection
Wear assessment, tension check, and replacement before a belt snap shuts your system down mid-shift.
Air End Inspection
Bearing condition, clearance check, and early detection of air end degradation before a full rebuild is needed.
Leak Detection
Ultrasonic leak surveys that identify and quantify air loss across your distribution system. Most facilities are losing 10 to 30% of their compressed air to leaks.
Electrical & Controls
Amp draw, connection integrity, sensor calibration, and control panel diagnostics to prevent electrical failures.
Cooler & Drain Service
Heat exchanger cleaning, drain trap testing, and condensate management to keep temperatures and moisture in check.
Performance Documentation
Written reports after every visit. Pressure, temperature, oil condition, findings, and forward recommendations.
Industries We Support
Who Benefits Most from a Maintenance Program
High-Run-Hour Facilities
Manufacturing plants, food processors, and warehouses running compressors 16 to 24 hours a day need more frequent attention. We build the cadence around your actual run hours.
Multi-Compressor Operations
Facilities with two or more compressors need coordinated service schedules. We rotate maintenance so you always have backup air during service windows.
Facilities Without In-House Techs
If you don't have a dedicated compressor technician on staff, our maintenance program becomes your maintenance department.
Why our program is different
Most Maintenance Programs Are Generic. Ours Aren't.
01
Built around your equipment, not a template
We assess your compressor brand, model, age, run hours, and environment before recommending a single service interval. Two facilities with the same compressor might need completely different schedules.
02
Documented transparency
Every visit produces a written report with inspection findings, work completed, and forward recommendations. You’ll never wonder what the tech actually did while they were here.
03
We catch what matters early
Our technicians aren’t just changing oil. They’re looking for the early indicators of air end wear, electrical degradation, and system inefficiency that turn into expensive failures if nobody catches them.
04
One provider for everything
If we find a problem during a maintenance visit, we handle the repair on the spot or schedule it before it becomes an emergency. We also source the parts, coordinate rental backup if needed, and keep everything under one roof.
All Brands. No Bias.
Our technicians are trained across manufacturers. Whether your nameplate says Ingersoll Rand or Mattei, we bring the same depth of expertise.
Brands we service include:
- Ingersoll Rand
- Atlas Copco
- Sullair
- Quincy
- Kaeser
- Elgi
- Chicago Pneumatic
- FS Curtis
- Gardner Denver
- Hertz
- Sauer
- Saylor-Beall
- Mattei
From call to running
How We Set Up Your Program
No guesswork. No generic calendars. A structured process from day one.
1. Equipment Assessment
We document every unit
2. Baseline Inspection
Full system health check
3. Program Design
Custom intervals and scope
4. Scheduled Service
Quarterly, semi-annual, or custom
5. Reporting
Written docs every visit
6. Adjust Over Time
Refine based on findings
Maintenance visit uncover something urgent?
We handle repairs on the spot or prioritize them before they become emergencies
What our clients say
Trusted by Facilities Across the Region
50+ years of relationships built on honest work and fast response
Common Questions
Questions About Air Compressor Maintenance and Taking Care of Equipment
If your question isn’t here, call us at 904-378-0280. We’d rather talk to you than make you read another FAQ page.
It depends on run hours and environment. Most industrial compressors benefit from quarterly service at minimum. High-hour or dusty environments may need monthly attention.
That’s exactly what we do. We assess your equipment, usage, and conditions to create a program tailored to your facility. Not a template from a manual.
Yes. We maintain compressors from every major manufacturer. Ingersoll Rand, Atlas Copco, Quincy, Sullair, Kaeser, and many more.
Oil and filter service, belt inspection, air end checks, electrical and controls diagnostics, leak detection, cooler cleaning, drain testing, and a full written report.
Yes. A poorly maintained compressor works harder for the same output, driving up electricity costs. Leak detection alone often recovers 10 to 30% of lost air capacity.
Every visit is documented with findings, work completed, and forward recommendations. You get full visibility into your equipment health.
Get In Touch
Stop Waiting for Breakdowns. Start Preventing Them.
Set up a maintenance program built for your facility, not a template.
- 904-378-0280 — Call us directly
- 5281 Edgewood Ct, Jacksonville, FL 32254 — Office & parts
- info@aceservice.us — Sales & general inquiries
Service Hours
Monday – Friday: 7:00 AM – 5:00 PM
Emergency service available 24/7
Request a Repair
Fill this out and we’ll get back to you within one business day. Emergency? Call instead.
We don’t share your information. We don’t send marketing emails. We fix compressors.
Our Service Area
Jacksonville • St. Augustine • Orange Park • Gainesville • Lake City • Palatka • Fernandina Beach • Palm Coast • Daytona Beach • Ocala • Brunswick GA • Savannah GA • Kingsland GA • Valdosta GA
Explore Our Other Services
Your Compressed Air Runs Better With ACE Behind It
Schedule a repair, request a quote, or talk to our team today.